I think I have worked well and spent a lot of time studying for this course and I think my marks bear this out, I have done 2 of the assignments and am about to submit the 3rd, I have still managed to study even though I currently have a land dispute with my neighbour, who is trying to steal a piece of my property, but through hard work I've managed to complete 3 modules to date and am now starting the fourth, thanks you for reading this.
-Derek
Always try to achieve maximum results. After wrok is always hectic to touch a book and study. I think if one wants to acheive any goal, it is to work extra hard.
-Patrick
I AM WORKING FULL TIME NIGHTS AND SPENDING ALOT OF TIME WITH MY SON I HAVE TRIED TO STUDY REALLY HARD AS MUCH AS I CAN. I HAVE JUST COMPLETED SECTION 1 PART A OF THE 2003 OBJECTIVES AND HAVE JUST FOUND I AM GOING TO HAVE TO START ALL OVER AGAIN AS I WILL NOT BE FINISHED IN TIME FOR THE DEADLINE. AWWW DEER ME. RIGHT I AM OFF TO LOATHE IN SELF PITTY NOW BUT I HAVE LEARNED ALOT ALONG THE WAY ANYWAY, THANKYOU SKILLSTRAIN.
-Michael
This month I have successfully carried out two computer repairs for friends and family, one a desktop system and one a laptop system. This has proved to be a very good test of the skills which I learned during the A+ part of my course.
The desktop system, belonging to my sister, was in a non-bootable state, with no video displayed, but both CPU and power supply (PSU) fans still operating. My first thought was that the PSU was faulty, and on checking the output voltages with a multimeter one of them was found to be far out with the accepted tolerance. However on replacing the PSU with a known good PSU the system was still in the same non-booting state. This along with the continual off state of the green power LED and the lack of responsiveness to the on/off power switch suggested the motherboard was also faulty. I recalled that intermittent power cuts had occurred in the area within the past few days, and suspected that a surge had caused damage to the PSU and motherboard. The graphics card, 512MB DDR memory stick, the hard disk, the CD/DVD drives, and the floppy drive were all tested in another working machine, and fortunately all were found to be functioning correctly. Although I could not test the CPU there was a good chance that it also would be undamaged. Therefore a replacement PSU and motherboard were purchased for the system (at total cost of £71). The system was re-assembled and due to the fact that the new motherboard had the same chipset (Intel 865G) as the original motherboard the system booted up successfully the first time into Windows XP. Only the on board audio driver required to be updated. I purchased a 6-way power surge protector to protect against any future power surges. Often a power surge can damage all components of a system but fortunately in this case only two components sustained damaged.
The laptop system was continually losing the correct date/time and reporting CMOS RAM configuration errors on startup. This suggested the CMOS RAM 3V lithium cell was needing replaced. In order to access this lithium cell (located on the motherboard) the system had to be completely disassembled, including removal of the TFT screen and its housing, the keyboard, the top cover, and CPU heatsink. This was quite challenging as I had never worked on a laptop system before. The manufacturer's technical support line could not offer advice on the correct disassemble procedure, but on researching the web I was able to determine some key information to allow me to make the repair successfully.
To complete these repairs I have drawn upon a wide range of the skills and knowledge I learned during my A+ course, which though a precursor to my CCNA studies, has proved to be a very valuable training in itself.
-Ross
During the last month I have helped a couple of people with there computers. Last week I went over to my sisters and installed AOL broadband for her but first I had to purchase a ethernet port connector which her computer did not have.I removed the side of computer and fitted the ethernet connector for her and loaded the software for her I am now glad to say she is now on broadband with AOL. I have also recently added some memory to my own computer which I purchased off the internet and again I had to open my pc up to insert the memory stick. I am proud of myself because I thought I could not do things like that and now I have started this course my confidence has grown loads.
-Terry
I've been completing all Tutor marked assignments to a high standard and regularly logging onto the skills train website. I regularly check my webmails to keep track of everything happening, and I use the resources on the site to help with my course.
-Craig
I have achieved a fantastic result in building my first Computer, its been the happiest time for me. The Lady was a novice never really used a computer, but I built it and taught her how to use it, she knows I am only a call away and she is doing really well and now on the internet and doesn't need much help from me. She just asked me to help her friend with a computer, and show her how to use it and to upgrade it for her.
-Patricia
I have gained alot of PC knowledge and managed to fix my own computer in various ways, for example a wireless networking system.
-Ian
I thought I would drop you a line and let you know how the course is going. I enrolled with Skills Train in February to do A+, N+, CCNA and finally CCNP ("this will keep me out of mischief for some time").
Initially I was full of feelings of self doubt and was rather nervous to say the least. Reason being that I am 42 years old and the last time I undertook major studies such as this, was almost 20 years ago!
When I received my material and started looking over the work, It dawned on me just how little I actually knew! We have all heard a lot of the terminologies used at some stage in our lives and careers, but never really new what they meant, how they functioned or for that matter how they fitted into the workings of the system.
I have found that by reading over the section twice and utilising two highlighters the information is sticking in my old 'Grey Matter' surprisingly well.
I have managed to achieve gradings of 80% and above so far and I can honestly say that I am thoroughly enjoying myself.
I can truthfully say that my self confidence is growing and is boosted when I get my marked results back every week! My only regret is that I did not do this earlier in my life!
Who said, "you can't teach an old dog new tricks"!
Thanks for the support and encouragement.
-Andrew
I have had to restart my course work 3 times in the 5 months that I have been with "Skills Train". I therefore, haven't been able to successfully finish "PC Hardware & Maintenance" nor "CompTIA A+ 2003" with the limited time I have got from when I am not working in "Catering" (kitchens, cheffing is time consuming and hard work whilst being unsociable), planing time to do college work and also see my Wife, Family and Friends in the short time I have to myself is VERY difficult and having to stop the progress on the "PC Hardware & Maintenance" and "CompTIA A+ 2003" and move to the "CompTIA A+ 2006" is very Disconcerting and understandably off putting in the feeling that I am going to be moved from the "CompTIA A+ 2006" which I am currently studying in 30 day's, and fitting in with the past events my achievements are that I have now got past the first TMA of "CompTIA A+ 2006" and now going to be sending you the second one in about 30 min, to me that's a great achievement as I have finally got past TMA 1 and also TMA 2 and can now hopefully move on to TMA 3 without interruption.
I have also tried to make a time table for my college work that will fit within the unsociable hours that I have to work in the caring industry and the "Student Timetables" that you have left as a help guide really don't fit in with ever changing shift work that catering poses.
I hope this will give you a better understanding of what you are asking from people when you keep changing course material, also looking that not every one works 9-5 mon-fri that want to change their career.
I know this sounds like I am just moaning about what has happened and also feel that it is an "Isolated" instance but there is people out there that have had to change from one study guide to another but I don't feel they have had to do it as often in the time span I have had to do. I have been with "Skills Train" just over 5 months and are now on my 3rd study guide changing twice big smiles though I'm sure we will get me to the CCNP finish line soon enough and a better and more exciting job thank you.
-Kevin
I haven't studied since late December 2006, when I realised the course material had changed and I would not be ready to sit the exam in March, which mean't I had to start from the beginning again, I lost all enthusiasm for the course, pressure at worked picked up and I ended up working over 50 hours a week. Then to cap it all my PC crashed and would not start up again, this was not a major problem as work bought me a new computer which is a better spec, it was when my future father in law asked me to look in the local paper and see if there were any cheap second hand PC's which would suit his needs that I realised I should be able to fix my old work PC from what I have learnt so far. So I asked work if they didn't mind me taking it home and trying to fix it, they said ok and off home it went with me.
I started by removing the casing and familiarised myself with the construction, checked all the wiring was connected properly, all were connected correctly, so scratching my head I turned to my training manuals for advise, quickly flipping through I discovered the PSU might be at fault, after a quick phone call to a electrician friend I had borrowed a multimeter and proceeded to to test the cables, first I checked the power lead and found that to be working, so I then moved onto the individual power connectors from the PSU and surprisingly there was no reading. So I unplugged all the connectors and removed it from the casing, I took it down to a local PC repair centre and explained what I thought was wrong, he confirmed my suspicions and asked if I had a surge protector at work, which I didn't, he explained that as we had a lightning storm recently a power surge could of damaged the PSU. After checking the details he ordered me a new PSU. It arrived the following week, and in just under 1 hour of careful re-assembling the PC, I pressed the on button, and believe it or not it booted up. I delivered the cleaned up PC to my future father in law the following day with a big smile on my face. Now I find myself around his house at least once a fortnight giving him lessons on how to make the most out of his PC and internet connection, which I am more than happy to do.
From this experience I have refound my enthusiam for the course and the enjoyment it used to give me, learnt something new, now both my work and my future father in law have surge protectors installed, and realised even though I have to start from the begining again, it won't take me long to catch up.
-Nicholas
I must admit that I did Hardware before coming doing this course but I have seen a great difference. My knowlegde about computers is grown and I am no more timid when it comes to computers. I am able to effectively deal with both portable computers and desk top as well.
Thank you to Skills Train. I have never regreted joining this course.
-Isaac
Passed three of my tma with good marks love skills train. The best course I have done in my life.
-Damien
|
